2 Preparation
14
2-3.
Using the Panel Button
The panel button on the operation panel is used to operate the IF1-WFXX.
Starting the WLAN Interface Board
Turn on the printer. The IF1-WFXX starts working approximately 20 seconds after the printer turns on.
Printing the WLAN Interface Board Configuration
Press the panel button. See 2-5, Printing the WLAN Interface Board Configuration (page 17) for details.
Switching to Setting Mode
Press and hold the panel button. The buzzer
*
will sound once, signaling a switch to setting mode.
・
Setting mode enables the reading of the factory default settings.
・
If there is no activity for three seconds in the setting mode, the buzzer
*
will sound once, signaling a return
to normal mode.
* Note that the buzzer will not sound if the IF1-WFXXis connected to the barcode printer. In addition, the
buzzer will not sound when the IF1-WFXX is used with the POS printer if the buzzer has been set to not
sound.
Restoring to the Factory Default Settings
Switch to setting mode, then press and hold the panel button. The IF1-WFXX will return to the factory
default settings.
When the operation is complete, the IF1-WFXX will restart automatically.
The settings are cleared so the wireless LAN must be configured again.
Warning
