3/3
H950 Abbreviated instruction
Adjusting the time and calendar manually
• Check world time setting in
beforehand.
1.
Pull the crown out to position
2
.
The second hand points to 30 seconds and stops.
2.
Press and release the lower right button
A
.
The second hand points 0 second and time and calendar become adjustable.
3.
Press and release the lower right button
A
repeatedly to
change the hand/indication to be corrected.
• Each time you press button
A
, the target changes as follows:
Minute → hour/24-hour → date → year/month → day of week →(back to
the top)
• The hands and indications slightly move when selected to show they
become adjustable.
4.
Rotate the crown to adjust the hand/indication.
• Date and the function hand (day of week) move synchronously.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
• Year and month are indicated with the second hand.
12
1
2
3
4
5
6
7
8
9
10
11
“Month” corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
“Year” corresponds to the years
since leap year and is indicated
with markers in the zone of each
month.
Years since leap year:
0
(Leap year)
Years since leap year:
1
Years since leap year:
2
Years since leap year:
3
0
1
2
3
5.
Repeat steps 3 and 4.
6.
Push the crown in to position
0
in accordance with a reliable
time source to finish the procedure.
Checking the reference position
1.
Push the crown in to position
0
.
2.
Press and hold the upper right button
B
for 7 seconds or more.
The hands and indication start to move to the current reference positions
stored in memory.
• Release the button as the hands/indication start to move.
3.
Check the reference positions.
Correct reference positions:
• Hour, minute and second hands: 0 hour 00
minute 0 second
• 24-hour hand: 24-hour position
• Day of week (function hand) : "S" (Sunday)
• Date indication: midway between "31" and "1"
When the current reference position is different
from the correct one, adjust the position following
the steps of “Correcting the reference position”.
4.
Press and release the upper right button
B
to finish the
procedure.
Correcting the reference position
1.
Push the crown in to position
0
.
2.
Press and hold the upper right button
B
for 7 seconds or more.
The hands and indication start to move to the current reference positions
stored in memory.
• Release the button as the hands/indication start to move.
3.
When all the hands stop moving, pull the crown out to position
2
.
4.
Press and release the lower right button
A
repeatedly to
change the hand/indication to be corrected.
• Each time you press the button, the target changes as follows:
Day of week (function hand)/date indication → hour /24-hour hands →
second/minute hands → (back to the top)
5.
Rotate the crown to adjust the hand/indication.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
6.
Repeat steps 4 and 5.
7.
Push the crown in to position
0
.
8.
Press and release the upper right button
B
to finish the
procedure.
Resetting the watch - All Reset
1.
Pull the crown out to position
2
.
2.
Press and hold buttons
A
and
B
at the same time for 3 seconds
or more and release them.
The second hand moves to the 0 second position and other hands and date
indication move slightly, and All Reset is executed.
After All Reset
After All Reset, adjust the reference position. Set the world time setting and
receive signals manually (on-demand reception) to adjust the time and calendar
after that.
