CITIZEN SYSTEMS JAPAN CO.,LTD.
3
Never perform the following. If not avoided, these may cause damage or trouble to
the printer or cause the printer to overheat and release smoke and cause burns or an
electrical shock. If the printer is damaged or is malfunctioning, be sure to turn the
power off immediately and remove the power cord from the outlet, then consult our
service personnel.
•
Do not jolt or impact to the printer by stepping on, dropping or hitting the printer.
•
Do not place the printer in a poorly ventilated area, or shut off the air vent of the
printer.
•
Do not place the printer where chemical reactions occur, such as in laboratories
or where air is mixed with salt or gas.
•
Do not use a power voltage or frequency other than those specified.
•
Do not plug/unplug the power cord or attach/detach the USB cable by simply
grabbing the power cord or USB cable. Do not pull or carry the printer when the
tension of the power cord or USB cable is increased.
•
Do not drop or put foreign matter such as clips and pins into the printer. This
may cause problems.
•
Do not plug the power cord into an outlet with many loads.
•
Do not spill drinks such as tea, coffee and juice on the printer or spray insecticide
on the printer. If drink or water is spilled, first be sure to turn the power off and
remove the power cord from the outlet, then consult our service personnel.
•
Do not disassemble or modify the printer.
Discard or safely store the plastic packing bag. This bag should be kept away from
children. If the bag is pulled over a child’s head, it may cause suffocation.
WARNING
WEEE MARK
If you want to dispose this product, do not mix with general
household waste. There is a separate collection system for
used electronics products in accordance with legislation
under the WEEE Directive (Directive 2002/96/EC) and is
effective only within European Union.
