— 20 —
A A A A A A A A A A
a a a a a
ESC = n
[Function]
Data Input Control
[Code]
<1B>H<3D>H<n>
[Range]
{0 =< n =< FF(Hex)}
[Outline]
Selecting equipment in which data input from the host is effective.
• Each bit of n indicates as follows:
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
[Caution]
• Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected
with this command.
[Default]
The initial value of n is “1”.
[Sample Program]
PRINT #1, “AAAAA”;
PRINT #1, CHR$ (&H1B) + “=” + CHR$ (0);
PRINT #1, “aaaaa” + CHR$ (&HA);
PRINT #1, CHR$ (&H1B) + “=” + CHR$ (1);
PRINT #1, “AAAAA” + CHR$ (&HA);
[Print Results]
Value
0
1
0
Printer
Invalid
Valid
1
Not defined
2
Not defined
3
Not defined
4
Not defined
5
Not defined
6
Not defined
7
Not defined
Bit
Equipment
>
