5-3
5.4 PCMCIA Memory Card
The PCMCIA memory card is used to:
1) Store the print format files. Data in the field register area can be
stored and loaded.
2) Store graphic data. For example, graphic data such as a corporate
logo can be stored and recalled from the PCMCIA memory card
and printed.
Note:
The maximum size of storing graphic data is 256K bytes.
3) Store downloaded HP Soft fonts.
Installation
1) Turn off the power to the printer.
2) Remove the PCMCIA memory card cover at the bottom of the
printer (see figure).
3) Insert the memory card (make sure the card is not inverted).
4) Replace the PCMCIA memory card cover.
Notes:
• Before use, carefully read and understand the instructions
regarding the PCMCIA memory card.
• Never try to insert or remove the PCMCIA memory card
before the power to the printer is turned off.
• Always close the PCMCIA memory card cover to keep out
dirt.
• If the PCMCIA memory card write failure occurs, check it
with the test command (STX.w). (Also, check the write
protection switch of the PCMCIA memory card.)
Содержание CLP-2001
