CBM-290/291 Service Manual
-
8 -
CITIZEN
·
Remove the printer mechanism(LT-
282) from the base plate assembly.
(1) Using the Phillips screwdriver,
remove 3 screws(binder, M2.6 x
5) used to secure the printer
mechanism.
(2) Remove the printer mechanism
from the base plate.
·
Remove a lever from the base plate
assembly.
(1) Using the Phillips screwdriver,
remove 1 screw(PHT, M2.6 x 5)
used to secure the lever.
5. Remove an auto cutter assembly.
(1) Put the regular screwdriver into
two holes located at the top of the
case and disengage paper feed
guide jaws.
(2) Pull out the auto cutter assembly
to this side.
