Citizen CBM-262 Type II, Руководство пользователя

Страница: 102 / 131

7
Chapter 7 Print Control Codes
92
m Function
0,30 Full Cut
1,31 Partial Cut (1 point left)
41
(Cutting po [n x basic calculation pitch] )
paper feed and full cut.
42
(Cutting po [n x basic calculation pitch] )
paper feed and partial cut (1 point left).
(58) Cutting of paper (GS V m, GS V m n)
Code: (1) [1D] h + [56] h + m
(2) [1D] h + [56] h + m + n
* (1) (0
≤
m
≤
1)
(30
≤
m
≤
31) Data are expressed in Hex code.
(2) (41
≤
m
≤
42)
(0
≤
n
≤
FF) Data are expressed in Hex code.
This command executes the specified paper cut.
• In the Standard mode, this command is valid only if it is input at the head of the
line.
In the case of (1):
•
When m = 1 or m = 31, a partial cut (1 point left) is executed.
In the case of (2):
•
When n = 0, after executing paper feed to the cutting position, the paper is cut.
• When n ( 0, after executing paper feed [n x basic calculation pitch] inch from
the cutting position, the paper is cut.
• The basic calculation pitch is set by GS P.
• The paper feed amount is calculated by the vertical basic calculation pitch (y).
Also, if there is a fraction, interpolation is carried out at the mechanism's mini-
mum pitch. Remainders are cut off.