- 16 -
ESC SP n
[Function]
Setting the right spacing of the character
[Code]
<1B>H<20>H<n>
[Range]
0
≤
n
≤
255
[Outline]
Sets the right spacing of character to [n x basic calculation pitch] inches.
[Caution]
• If the horizontal magnification of character is 2 or more, the right spacing increases
with the magnification.
• Does not affect Kanji.
• The right spacing can be set separately for the STANDARD and PAGE MODES.
• The basic calculation pitch is set by GS P. Once defined, the right spacing is not
changed if the basic calculation pitch is changed by GS P.
• Fractions resulting from calculation are corrected with the minimum pitch of the
mechanism, and the remainder is omitted.
• In STANDARD MODE, this command uses the horizontal basic calculation pitch (x).
• In PAGE MODE, the basic calculation pitch used by this command depends on the
start point:
(1) If the start point specified by ESC T is top left or bottom right, the command uses
the horizontal basic calculation pitch (x).
(2) If the start point specified by ESC T is top right or bottom left, the command uses
the vertical basic calculation pitch (y).
• The maximum right spacing is capable of approximately 31.906 mm (255/203
inches). A setting greater than this maximum is trimmed to the maximum.
[Default]
n = 0
[See Also]
GS P
[Sample Program]
LPRINT
CHR$(&H1B);"
";
CHR$(0);
LPRINT
"AAAAA";
CHR$(&HA);
LPRINT
CHR$(&H1B);"
";
CHR$(1);
LPRINT
"AAAAA";
CHR$(&HA);
LPRINT
CHR$(&H1B);"
";
CHR$(12);
LPRINT
"AAAAA";
CHR$(&HA);
[Print Results]
AAAAA
0-dot
space
A
A
A
A
A
1-dot
space
A
A
A
A
A
12-dots
space
Содержание BD2-2220
