14
15
Setting the Time
1. Pull the crown out to the time correction position (second position) when the second
hand reaches the 0 seconds position.
2. Turn the crown to the right (clockwise) and set the time.
• The day changes immediately after about 5:00 AM. Set the time while paying
attention to AM and PM by referring to the time when the day has changed.
3. Return the crown to the normal position in synchronization with a telephone or other
time service.
[Helpful Hint for Setting the Time Accurately]
After first stopping the second hand at the 0 seconds position, advance the hour hand
and minute hand 4-5 minutes past the correct time and then turn it back in the counter-
clockwise direction to the correct time to accurately set the time.
[Notes]
• If the date is corrected when the time on the watch is between 9:00 PM and 12:00
AM, the date may not change on the following day. Avoid correcting the date
during this time.
• The calendar operates based on a 31-day month. Correct the date by turning the
crown to the to the left to set to the first day of the following month in months
with less than 31 days (months with 30 days and February).
• Avoid correcting the month when the date hand indicates a date from the 31st to
the 2nd. If you want to correct the month during this time, wait until the date
hand is outside the range of the 31st to the 2nd. Then reset the date hand to the
correct date.
• When turning the crown to the left (counter-clockwise) when correcting the time
or day, the changing of the date may change a day late during normal use.
