manualshive.com logo in svg

Citel C4110, Инструкция по установке и эксплуатации

Поделиться
Скачать
Citel C4110 Скачать руководство пользователя страница 6

 

 

6

Connecting your C4110 Phone                                    

 

Follow the following steps to connect the C4110 IP Phone 

 

Step1: Pull upward the stand through the slots on the base, remove the stand. 

 

Step2: Connect one end of the handset cord to the handset jack with symbol on

 

the 

telephone base and connect the other end of the handset cord to the handset. Route the 
cord through the cord guide channel. 
Slide the stand back until it clicks into the lock position. 

 

Step3: Connect one end of the supplied Ethernet cable with RJ45 connector to the 

Ethernet

 

port on the telephone base and connect the other end of the cable to an IP 

voice network jack through the catch on the telephone stand. 

 

Step4: If you are connecting your PC Ethernet through the phone, connect one end of 

the PC Ethernet cable to your phone using the RJ45 connector marked with the 
symbol on

 

the telephone base, and thread it through the catch on the stand. Connect 

the other end to the LAN port on your PC. 

 

Step5: Plug AC power adapter into the base of the telephone, and plug the adapter 

into the nearest AC power outlet. If you are using PoE (Power over Ethernet), the AC 
power adapter is not needed. 

 

Step6: To wall mount the C4110 IP Phone, you need to remove the stand and reverse 

it, then slide it back. Use the wall mounting holes on the stand to attach the IP Phone 
on the wall. 
 

 

Содержание C4110


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды