Citel C4110, Инструкция по установке и эксплуатации

Страница: 33 / 49

33
2.5.2
Digital Map configuration
Digit map is a set of rules to determine when the user has finished dialing. Digital Map is
based on some rules to judge when user end their dialing and send the number to the server.
With digital map, users don’t have to press
‘
#’ key or "call" key after finish dialing. If the
number dialed matches some item in the digital map table, or it doesn’t match with any item,
this number will be sent out immediately. It is not like using dial peer; using digital map
won’t change the number dialed, the number sent is the same as the number dialed.
End With “#”: Checked- use # for the end of dialing. User dials 200300#. phone send 200300
to server immediately.
Fixed Length: when the length of the dialing is matched, the call will be sent.
Timeout: Specify the timeout of the last dial digit. The call will be sent after timeout.
End with “#”, fixed length and Time out, these options are not repulsion. That means, these
three ways can be use together or alone.
User could also use digital map table to make own rule.
X Represents any one number between 0 and 9.
Tn Represents the last digit timeout. Here [ n ] represents the time from 0~9 second, it is
necessary. Tn must be the last two digit in the entry. If Tn is not included in the entry, we
use T0 as default, it means system will sent the number immediately if the number
matches the entry.
. (Dot) represents any number and no length limit.
[ ] Number location value range. It can be a number range(such as [1-4]), or number is
separated by comma such as [1,3,5], or use a list such as [234]
Example:
[1-8]xxx any 4 digits number between 1000 and 8999 sending out immediately.