6
•
Unplug the Bubble-Max X2 Auto-Fill™ from the electrical power source.
•
Carefully tilt the machine forward to slowly pour the water from the front reservoir. If you
tip the machine too far, the water in the rear reservoir may spill over.
5.6
Troubleshooting
Problem:
Solution:
Wand wheel, pump, and fan not operating.
- Check power.
- Check fuse.
Decreased bubble output.
- Clean the machine.
Pump will not turn off.
- Check switch is in “OPERATE” position.
Tube is leaking at “INTAKE” or “DRAIN”
fitting.
- Check that tubes are fully inserted into the
fittings.
Wand wheel is chattering.
- Check that nothing is hindering the
movement of the wand wheel.
6. Technical Data
Bubble-Max X2 Auto-Fill System™
P/N 100222 (120V)
•
P/N 100223 (230V)
Dimensions
(Machine, Fan and Stand)
20” x 16.75” x 27”
(51cm x43cm x 69cm)
Weight (Machine, Fan and Stand)
29 lbs. (113.2kg)
Wand Wheel
20 Wands (10 Left, 10 Right)
Bubbles Per Minute
1200-1400
Bubble Size
1.25” – 3” (3cm – 8cm)
Fluid Capacity
1 qt.
Consumption
1 cup = 20 min. / 3 qt. = 4 hours
Wind Speed (Director Jr. Fan™)
4, 6, or 8 MPH
Distance (Director Jr. Fan™)
15’ – 40’ (4.5m – 12m)
CFM (Director Jr. Fan™)
132/194/258
RPM (Director Jr. Fan™)
1100/1600/2100
Electrical Supply
Bubble-Max X2 Auto-Fill™ 120 VAC, 1A, 50/60 Hz
Director Jr. Fan™ 120 VAC, 1.2A 50/60 Hz
Fuse
Bubble-Max X2 Auto-Fill™ 1A – 125 VAC
Limited Warranty
One Year
Rev. 01/23/2018
