8
6.
Service and Maintenance
Care of your Bubble Buddy
TM
will give you years of service. Note:
cleaning your unit is going to pay off in constant good performance.
1.
Regular cleaning of the bubble wheel is required.
To clean, add warm water to the tray
and turn on machine, allowing the wands to be completely submerged over and over for
ten minutes. Change the water frequently until clean wands appear.
2.
To access the tray, loosen the two thumbscrews and remove the two adjacent retention
screws and lift the top. After cleaning, reinstall the retention screws and tighten the
thumbscrews. THE RETENTION SCREWS MUST BE IN PLACE IF THE MACHINE IS
TO BE HUNG BY THE HANGING BRACKET. Never hang without ALL of the screws in
place.
3.
Dry the machine with a paper towel prior to storage.
4.
Do not transport or ship with bubble fluid inside the machine.
5.
Disconnect the remote or DMX control box before moving. This may be broken if pulled
or bumped.