Cissell MANCONS, Руководство пользователя

Страница: 5 / 29

Page 4
INSTALLATION INSTRUCTIONS
NOTE: This machine should be installed by qualified service personnel only.
1. Uncrate the machine. Check the nameplate voltage and current; match it with the power
being connected.
2. Set the machine in position and bolt to floor.
3. Connect Water Spray Gun to machine. Remove the Lint Screen to access the connection.
Open the valve on the Condenser and replace the Lint Screen.
4. Connect steam supply line as shown in illustration.
5. Connect steam return line as shown.
NOTE: Before final return line connection is made,
open the steam supply valve and blow all foreign matter out of the steam lines. Failure to
do so will cause trap to leak.
6. Make electrical connections in junction box on rear of machine, following applicable electric
codes. Include a fused disconnect switch or circuit breaker with “slow-blow” characteristics
and be capable of carrying 15 amps, 115 volts or 8 amps, 230 volts.
7. Install the revolving form on the machine.
8. Turn on the electric power to machine. Remove the plastic cover from the bag. Open the
steam lines.
9. Test the machine, following the OPERATING INSTRUCTIONS in this manual.