Cissell Gear Cabinet, Руководство пользователя

Страница: 7 / 24

Page 7
#1 Gear cabinet.
#2 Temperature Units: Selects °F or °C for the temperature display. Factory setting is for °F.
#3 Not used in this application.
#4 Not used in this application.
#5 Not used in this application.
#6 Buzzer Time: This Dip switch determines the length of time that the end of cycle buzzer will remain
on. “OFF” indicates that the buzzer will sound for 5 seconds when the drying cycle is completed.
“ON” indicates that the buzzer will sound continuously until the “STOP” button is pressed.
#7 Not used in this application.
#8 Programming: This switch enables or disables the programming feature.
DIAGNOSTIC MICROPROCESSOR CONTROL - FEATURES
3.0 DIP Switch Settings
The DMP has an 8-position DIP switch bank that is accessible from the back of the control board. By
switching these DIP switches, it is possible for the operator to customize the display and some of the
operating features of the dryer.
Switch #
1
2
3
4
5
6
7
8
Function
Gear Cabinet
Temperature Units
Not Used
Not Used
Not Used
Buzzer Timer
Not Used
Programming
OPL
OFF
OFF
ON
ON
ON
ON
ON
OFF
Factory Settings