Never shake the machine body during
use
.
General safety
instructions, the machine may topple and fall(for fear of scalding)
Never unplug the power plug with wet hands(risk of electric shock)
Never destroy the power cable or power plug. Without permission,
never machine, damage, excessively bend, forcefully pull or twist the
power cable or power plug, place the power cable or power plug
near a heating object or under heavy load, or squeeze the power
cable or power plug(potential risk of ignition and fire caused by
electric shock and short circuit)
If the power cable or power plug is damaged, or still loose after
they are inserted into the socket, never sue the machine(risk of
ignition and fire caused by electric shock and shot circuit)
Never disassemble or damage the batter y(potential risk of ignition
and fire caused by short circuit
of
batter y
)
Never place the batter y on a flame(potential risk of ignition and
fire caused by short circuit
of
batter y
)
Never disassemble, repair or modify this machine(risk of scalding,
electric shock or injur y)
In case of abnormality or fault, stop the machine immediately, and
unplug the plug from the power socket(possibility of smoking,
ignition, electric shock , scalding and injur y)
The batter y shall not be exposed to excessive heat such as
sunshine, fire or the like.
Before operating this system, check the voltage of this system to
see if it is identical to the voltage of your local power supply
Do not place this machine close to strong magnetic fields
Do not place this machine on an amplifier or receiver
Do not place this machine close to damp areas as the moisture will
affect the life of the laser head
If any solid object or liquid falls into the machine, unplug the
system and have it checked by qualified personnel before operating
it any further
Do not attempt to clean the machine with chemical solvents as this
may damage the finish. Use a clean, dr y or slightly damp cloth
When removing the power plug from the wall outlet, always pull
directly on the plug, never yank on the cord
11
