
Set Server Parameter Values
Note:
This request require administrator access
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/admin/setparam.cgi?
[nosync=
<value>
&]
<parameter>=<value>
[&<parameter>=<value>…][&return=<return page>]
Parameter
nosync
<group>_<name>.
return
Value
0, 1
value to assigned
<return page>
Description
Specifies that there should be no sync (write) of
the corresponding configuration file on flash. If
parameter is omitted, a sync write will occur.
(note: this parameter must be put at begin
of parameter list)
Assign
<value>
to
the
parameter
<group>_<name>.
.
Redirect to the page
<return page>
after the
parameter is assigned
.
The
<return page>
can be
a full URL path or relative path according the the
current path. If you omit this parameter, it will
redirect to an empty page.
(note: The return page can be a general HTML
file(.htm, .html) or a server script executable
(.vspx) file. It can not be a CGI command. It can
not have any extra parameters. This parameter
must be put at end of parameter list)
Example:
Set the IP address of server to 192.168.0.123
http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
- 61 -