Cisco XR 1200 series Скачать руководство пользователя страница 108

Страница: 108 / 432

show event manager metric process

To display the Embedded Event Manager (EEM) reliability metric data for processes, use the

show event

manager metric process

command in EXEC mode.

show event manager metric process

{

all

job-id

process-name

}

location

{

all

node-id

}

Syntax Description

Specifies all the processes.

all

Process associated with this job identifier. The value ranges from 0-4294967295.

job-id

Process associated with this name.

process-name

Specifies the location of the node.

location

Displays hardware reliability metric data for all the nodes.

all

Hardware reliability metric data for a specified node. Displays detailed Cisco
Express Forwarding information for the designated node. The

node-id

argument

is entered in the

rack/slot/module

notation.

node-id

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.2

The

show fault manager metric process

command was replaced with

the

show event manager metric process

command.

Release 3.6.0

Task ID was changed from fault-mgr to eem.

Release 3.7.0

Usage Guidelines

The system maintains a record of when processes start and end. This data is used as the basis for reliability
analysis.

Use the

show event manager metric process

command to obtain availability information for a process or

group of processes. A process is considered available when it is running.

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Embedded Event Manager Commands

show event manager metric process

Содержание XR 1200 series

















































































































































































































































































































































































































































Результаты поиска

Содержание XR 1200 series

Отзывы:

Похожие инструкции для XR 1200 series

Бренды по названию

Популярные бренды

Cisco XR 1200 series, Справочник по командам

Результаты поиска

Содержание XR 1200 series

Отзывы:

Похожие инструкции для XR 1200 series

Бренды по названию

Популярные бренды