Cisco WTR54GS Скачать руководство пользователя страница 48

Страница: 48 / 86

Chapter 5: Configuring the Wireless-G Travel Router with SpeedBooster
The Administration Tab - Factory Defaults

Wireless-G Travel Router with SpeedBooster

The Administration Tab - Factory Defaults

This screen allows you to restore the Router’s configuration to its factory default settings.

Factory Defaults

Restore Factory Defaults

. Click this button to reset all configuration settings to their default values. Any settings

you have saved will be lost when the default settings are restored.

Help information is shown on the right-hand side of the screen.

The Administration Tab - Firmware Upgrade

This screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless you are
experiencing problems with the Router or the new firmware has a feature you want to use.

Firmware Upgrade

Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website,

www.linksys.com

. Then extract the file.

Please select a file to upgrade

. In the field provided, enter the name of the extracted firmware upgrade file, or

click the

Browse

button to find this file.

Upgrade

. After you have selected the appropriate file, click this button, and follow the on-screen instructions.

Help information is shown on the right-hand side of the screen.

Note:

Do not restore the factory defaults unless you are having difficulties with the Router and have

exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-enter all
of your configuration settings.

Note:

The Router may lose all of the settings you have customized. Before you upgrade its firmware,

write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all
of your configuration settings.

download

: to receive a file transmitted over a network.

firmware

: the programming code

that runs a networking device.

upgrade

: to replace existing software or

firmware with a newer version.

Figure 5-42: Administration Tab - Firmware Upgrade

Figure 5-41: Administration Tab - Factory Defaults

Содержание WTR54GS























































































Результаты поиска

Содержание WTR54GS

Отзывы:

Похожие инструкции для WTR54GS

Бренды по названию

Популярные бренды

Cisco WTR54GS, Руководство пользователя

Результаты поиска

Содержание WTR54GS

Отзывы:

Похожие инструкции для WTR54GS

Бренды по названию

Популярные бренды