
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
39
6
To enable wireless Wired Equivalent Privacy (WEP) security, follow these steps:
STEP 1
Click
Wireless
>
Security
.
STEP 2
From the Security Mode drop-down menu, select WEP.
STEP 3
To enable wireless isolation within the SSID, click
Enabled
.
STEP 4
Provide the following information:
•
Authentication Type
—Choose
Open System
or
Shared Key
as the 802.11
authentication type. The default is
Open System
.
•
Default Transmit Key
—Select the key to be used for data encryption.
•
WEP Encryption
—Select a level of WEP encryption,
64 bits (10 hex digits)
or
128 bits (26 hex digits)
.
•
Passphrase
—To generate WEP keys using a passphrase, then enter the
passphrase in the Passphrase field and click
Generate
. The auto-generated
keys are not as strong as manual WEP keys.
•
Key 1-4
—To manually create WEP keys, enter these keys in the Key 1, Key
2, Key 3, and Key 4 fields. Each WEP key can consist of the letters “A”
through “F” and the numbers “0” through “9.”. A key should be 10 characters
in length for 64-bit encryption or 26 characters in length for 128-bit
encryption.
STEP 5
Click
Save
.
Configuring Connection Control
The Wireless > Connection Control Settings page displays the wireless
connection settings.
•
“Disabling Connection Control” on page 40
•
“Enabling Local Connection Control” on page 41
•
“Enabling RADIUS Connection Control” on page 42