6
Cisco WAP361 Quick Start Guide
S
TEP
2
For wall mounting, drill four pilot holes at the mounting hole
locations you have marked (at opposite corners of the bracket),
and use appropriate anchors as required.
N
OTE
The pilot hole size varies according to the material, and its
thickness, you are fastening. Cisco recommends that you test the
material to determine the ideal hole size for your mounting
application.
S
TEP
3
Feed the cable(s) from the junction box / wall through the large
center cable access hole in the bracket, with the words “NOTICE
WALL MOUNT ONLY” facing you as shown in
Figure 2
.
Figure 2
Bracket Mounting Direction
S
TEP
4
Position the mounting bracket mounting holes (with the words
“NOTICE WALL MOUNT ONLY” facing you) over the screw holes.
S
TEP
5
Insert a screw into each mounting hole and tighten.
N
OTE
Screws supplied in kit (see
Figure 3
) may not be appropriate
for
all
mounting options. You may need to obtain screws which fit
your custom installation.
