Cisco WAG54G Скачать руководство пользователя | Manualshive

Страница: 63 / 94

background image

57

Appendix A: Troubleshooting
Common Problems and Solutions

Wireless-G ADSL Home Gateway

•

For Netscape 4.7 or higher:

1. Start

Netscape Navigator

, and click

Edit

,

Preferences

,

Advanced

, and

Proxies

.

2. Make sure you have Direct connection to the Internet selected on this screen.
3. Close all the windows to finish.

11. To start over, I need to set the Gateway to factory default.

Hold the

Reset

button for 10 seconds and then release it. This will return the Internet settings, password,

forwarding, and other settings on the Gateway to the factory default settings. In other words, the Gateway will
revert to its original factory configuration.

12. I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys international website
and download the latest firmware at www.linksys.com/international.
•

Follow these steps:

1. Go to the Linksys international website at http://www.linksys.com/international and select your

region or country.

2. Click the

Products

tab and select the Gateway.

3. On the Gateway’s webpage, click

Firmware

, and then download the latest firmware for the Gateway.

4. To upgrade the firmware, follow the steps in the Administration section found in “Chapter 5:

Configuring the Wireless-G ADSL Home Gateway.”

13. The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or
make the Power LED stop flashing:
•

If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open
the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s
instructions.

•

Set a static IP address on the computer; refer to “Problem #1, I need to set a static IP address.” Use the
following IP address settings for the computer you are using:

IP Address: 192.168.1.50
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1

•

Perform the upgrade using the TFTP program or the Gateway’s web-based utility through its
Administration tab.

14. My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a
period of inactivity, just like a normal phone dial-up connection to the Internet.
•

There is a setup option to “keep alive” the connection. This may not always work, so you may need to re-
establish connection periodically.

«
...
61
62
63
64
65
...
»

Содержание WAG54G































































































Отзывы:

Нет отзывов

Похожие инструкции для WAG54G

Бренд: ICC Страницы: 281

Бренд: Xylem Страницы: 24

Бренд: Extron electronics Страницы: 23

Бренд: ZyXEL Communications Страницы: 18

Бренд: RTA Страницы: 73

Бренд: BEC Страницы: 14

Бренд: PEHA Страницы: 4

Бренд: ABB Страницы: 20

SecPath M9000-AI-E16

Бренд: H3C Страницы: 128

SURFboard SBG6400

Бренд: ARRIS/Motorola Страницы: 59

Touchstone TG862

Бренд: Arris Страницы: 2

Touchstone TG3452

Бренд: Arris Страницы: 2

MediaAccess TG799vn

Бренд: Technicolor Страницы: 128

Бренд: Nexo Страницы: 95

Бренд: enphase Страницы: 3

DeviceLinx Xchip Direct SoC

Бренд: Lantronix Страницы: 62

CORESYNC 1807981000

Бренд: molex Страницы: 2

1-Wire Gateway 11 Modbus TCP

Бренд: esera automation Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды