Cisco VPN 3002 Hardware Client Manager, Справочное руководство

Страница: 247 / 282

C H A P T E R
14-1
VPN 3002 Hardware Client Reference
OL-1893-01
14
Using the Command-Line Interface
The VPN 3002 Hardware Client command-line interface (CLI) is a menu- and command-line-based
configuration, administration, and monitoring system built into the VPN 3002. You use it via the system
console or a Telnet (or Telnet over SSL) session.
You can use the command-line interface to completely manage the system. You can access and configure
the same parameters as the HTML-based VPN 3002 Hardware Client Manager.
This chapter describes general features of the command-line interface and how to access and use it. It
does not describe the individual menu items and parameter entries. For information on specific
parameters and options, see the corresponding section of the Manager in this manual. For example, to
understand Ethernet interface configuration parameters and choices, see Configuration | Interfaces |
Private/Public in
Chapter 3, “Interfaces” .
Accessing the Command-line Interface
You can access the command-line interface in two ways: via the system console or a Telnet (or Telnet
over SSL) client.
Console Access
To use the console:
1. Connect a PC to the VPN 3002 via an RJ-45 serial cable (which Cisco supplies with the system)
between the console port on the VPN 3002 and the COM1 or serial port on the PC. For more
information, see the VPN 3002 Hardware Client Getting Started guide.
2. Start a terminal emulator (e.g., HyperTerminal) on the PC. Configure a connection to COM1 with
port settings of:
9600 bits per second.
8 data bits.
No parity.
1 stop bit.
Set the emulator for VT100 emulation, or let it auto-detect the emulation type.