Cisco VPN 3000, Руководство пользователя

Страница: 141 / 502

Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add | Local or Remote Network List
7-17 VPN 3000 Concentrator Series User Guide
Figure 7-8: Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add | Local or
Remote Network List screen
List Name
The Manager supplies a default name that identifies the list as a LAN-to-LAN local or remote list, which
we recommend you keep. Otherwise, enter a unique name for this network list. Maximum 48 characters,
case-sensitive. Spaces are allowed.
If you use the
Generate Local List
feature on the
Local Network List
screen, edit this name after the system
generates the network list.
Network List
Enter the networks in this network list. Enter each network on a single line using the format
n.n.n.n/
w.w.w.w
, where
n.n.n.n
is a network IP address and
w.w.w.w
is a wildcard mask.
Note: Enter a wildcard mask , which is the reverse of a subnet mask. A wildcard mask has 1s in bit positions to
ignore, 0s in bit positions to match. For example,
10.10.1.0/0.0.0.255
= all
10.10.1.nnn
addresses.
If you omit the wildcard mask, the Manager supplies the default wildcard mask for the class of the
network address. For example,
192.168.12.0
is a Class C address, and default wildcard mask is
0.0.0.255
.
You can enter a maximum of 200 networks in a single network list.