Cisco VPN 3000, Руководство пользователя

Страница: 102 / 502

5
Servers
5-6 VPN 3000 Concentrator Series User Guide
Server Port
Enter the TCP port number by which you access the server. Enter
0
(the default) to have the system
supply the default port number,
139
.
Timeout
Enter the time in seconds to wait after sending a query to the server and receiving no response, before
trying again. Minimum is
1
second, default is
4
seconds, maximum is
30
seconds.
Retries
Enter the number of times to retry sending a query to the server after the timeout period. If there is still
no response after this number of retries, the VPN Concentrator declares this server inoperative and uses
the next NT Domain authentication server in the list. Minimum is
0
, default is
2
, maximum is
10
retries.
Domain Controller Name
Enter the NT Primary Domain Controller hostname for this server; e.g.,
PDC01
. Maximum 16 characters.
You must enter this name, and it must be the correct hostname for the server whose IP address you
entered in Authentication Server Address above; if it is incorrect, authentication will fail.
Add or Apply / Cancel
To add the new server to the list of configured user authentication servers, click Add . Or to apply your
changes to the configured server, click Apply . Both actions include your entries in the active
configuration. The Manager returns to the Configuration | System | Servers | Authentication screen. Any new
server appears at the bottom of the Authentication Servers list.
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your entries, click Cancel . The Manager returns to the Configuration | System | Servers |
Authentication screen, and the Authentication Servers list is unchanged.
Server Type = SDI
Configure these parameters for an RSA Security Inc. SecurID authentication server.