Cisco VCO/4K Скачать руководство пользователя страница 7

Страница: 7 / 86

VCO/4K Mechanical Assemblies Overview 1-1

Technical Descriptions

VCO/4K Mechanical Assemblies Overview

1.0 INTRODUCTION

The Cisco VCO/4K Mechanical Assemblies describe the physical architecture and assemblies

of a VCO/4K system, including system enclosures, subracks, power subsystems, storage

subsystems, and other general system components.

Each technical description in this series reflects the most current information available about

the product. The information contained in a technical description is specific to a single

component within a system. Other system documents point to technical descriptions as

containing the most detailed information available for a component.

A technical description contains information to service and maintain the component. For

system-level servicing, refer to the Cisco VCO/4K System Maintenance Manual. The

maintenance manual assists in isolating the cause of a system malfunction and serves as a

pathfinder to the more detailed information contained in technical descriptions.

2.0 CISCO CONNECTION ONLINE

Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online

is the foundation of a suite of interactive, networked services that provides immediate, open

access to Cisco information and resources at anytime, from anywhere in the world. This highly

integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

CCO’s broad range of features and services helps customers and partners to streamline

business processes and improve productivity. Through CCO, you will find information about

Cisco and our networking solutions, services, and programs. In addition, you can resolve

technical issues with online support services, download and test software packages, and order

Cisco learning materials and merchandise. Valuable online skill assessment, training, and

certification programs are also available.

Customers and partners can self-register on CCO to obtain additional personalized

information and services. Registered users may order products, check on the status of an order

and view benefits specific to their relationships with Cisco.

Содержание VCO/4K























































































Результаты поиска

Содержание VCO/4K

Отзывы:

Похожие инструкции для VCO/4K

Бренды по названию

Популярные бренды

Cisco VCO/4K, Механические сборки

Результаты поиска

Содержание VCO/4K

Отзывы:

Похожие инструкции для VCO/4K

Бренды по названию

Популярные бренды