manualshive.com logo in svg

Cisco UNIFIED COMMUNICATIONS UC320W, Руководство администратора

Поделиться
Скачать
Cisco UNIFIED COMMUNICATIONS UC320W Скачать руководство пользователя страница 37

Ports and Trunks

FXS Ports

Cisco Unified Communications UC320W Administration Guide

37

 

4

FXS Ports

Use the 

Configuration > Ports and Trunks > FXS Ports

 page to enable the phone 

(FXS) ports on the Cisco UC320W and Cisco SPA8800 IP telephony gateways. 
These ports support analog devices. 

Note: 

Refer to the on-screen illustration for the location of the FXS ports, where 

you can connect analog devices. You can position your mouse pointer over the 
pointer icon to view the picture at a larger size. 

Enabled: 

Check this box to enable the port. Uncheck the box to disable the port. 

As a best practice, enable the ports only as needed, to avoid unnecessary impact 
on the 24-user limit. This limit applies to all IP phones and all enabled FXS ports on 
SPA8800 gateways. It does not include the built-in FXS port on the Cisco 
UC320W.

SIP/BRI Trunks

Use the 

Configuration > Ports and Trunks > SIP/BRI Trunks

 page to enter the 

settings for the SIP providers and BRI gateways that provide Voice over IP (VoIP) 
services. You can add up to four different services. 

Note: 

This configuration page is available if the System Mode is set to PBX or 

Blend. It is not available in Key System mode. (For more information, see the 

PBX/

Key System

 page.)

About SIP/BRI Trunks

•

The Cisco UC320W supports up to 12 simultaneous calls across all trunks 
(including FXO and SIP/BRI trunks).

•

To configure the dialing prefix for outbound call routing through your FXO 
trunks and SIP/BRI trunks, see the 

Outbound Trunks

 page.

•

To enter the phone numbers and configure the inbound call routing for these 
trunks, see the 

Inbound Calls

 page.

•

After applying your configuration, verify your settings by placing outbound 
calls through this trunk. Also use an external phone such as a cell phone to 
place a call to the phone numbers for this trunk.

Содержание UNIFIED COMMUNICATIONS UC320W





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды