Cisco Unified 7905G, Руководство администратора

Страница: 41 / 238

2-7
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
OL-4277-01
Chapter 2 Installing the Cisco IP Phone Models 7905G and 7912G
Installing the Cisco IP Phone Models 7905G and 7912G
Most frequently, the configuration parameter-value pairs for each phone are
contained in a configuration file known as a profile that is stored on a TFTP server
on the network. When the phone powers up, it contacts the TFTP server and
downloads its profile. To do so, however, the phone must first receive a basic
configuration that instructs it to download its profile from the TFTP server and
informs it of the server location. This basic configuration can be preprogrammed
on the phone before it is shipped to the end user, or it can be performed by the end
user when the phone is installed.
For more information about configuring a phone, see Chapter 3, “Configuring the
Cisco IP Phone Models 7905G and 7912G for SIP.” For detailed information
about profiles, see Chapter 6, “Configuring the Cisco IP Phone Models 7905G
and 7912G Using a TFTP Server.”
The following sections describe how to install the Cisco IP Phone models 7905G
and 7912G:
•
Physical Installation of the Cisco IP Phone Models 7905G and 7912G,
page 2-7
• Mounting the Phone to the Wall, page 2-12
•
Basic Configuration of the Cisco IP Phone Models 7905G and 7912G,
page 2-13
Related Topic
• Safety, page 2-2
Physical Installation of the Cisco IP Phone Models 7905G and
7912G
To install the Cisco IP Phone models 7905G and 7912G, perform the following
steps.
See Figure 2-1 as you install the Cisco IP Phone 7905G, or see Figure 2-2 as you
install the Cisco IP Phone 7912G.