A-1
Cisco uBR905 Router Hardware Installation Guide
OL-0598-01 (9/2000)
A P P E N D I X
A
Technical Specifications
This appendix contains the technical specifications for the Cisco uBR905 cable access router.
Physical, Power, and Environmental Specifications
Table A-1 lists the Cisco uBR905 cable access router physical specifications and power requirements.
Table A-1
Cisco uBR905 Cable Access Router Physical Specifications
Description
Specification
Dimensions (H x W x D)
2.30 x 13 x 9.30 in. (5.842 x 33.02 x 24.77 cm)
Weight
3 lb (1.36 kg)
1 lb (0.45 kg) for the AC-input external power supply
AC-input voltage
120 to 240 VAC
1
wide input with power factor correction
1.
VAC = volts alternating current.
AC-input current rating
1 A
2
maximum
2.
A = ampere.
AC-input cable
18 AWG
3
three-wire cable, with an IEC 320 three-lead receptacle on the power supply end, and
a North American (NEMA 5-15P) plug on the power source end; other country-specific cords
are available and supplied as ordered.
3.
AWG = American Wire Gauge.
Power dissipation
12 to 15W
Frequency
50/60 Hz
4
4.
Hz = hertz.
Temperature
32° to 104°F (0 to 40°C) operating; -13° to 158°F (-25° to 70°C) nonoperating
Humidity
5 to 95% noncondensing
Noise level
38 dBa
5
maximum at desktop, 43 dBa maximum in an office
5.
dBa = adjusted decibels.
Software requirement
Cisco uBR905 cable access router software—Cisco IOS Release 12.2(1)T or higher
Agency approvals
Safety: UL 1950, CSA 22.2 No. 950, EN60950, IEC60950, AS/NZS3260, TS001
EMI: EN50082-1:1992, EN55022:1994 Class B, AS/NZS 3548:1995, VCCI 3197.04 Class B,
47 CFR 15 Subpart B, 1997 Class B.
See also Appendix C, “Regulatory Compliance and Safety Information.”
