show controllers cable-modem mac
Troubleshooting Tips for the Cisco uBR904 Cable Modem 33
*Mar 7 01:43:15: 528317.958 CMAC_LOG_RNG_RSP_MSG_RCVD
*Mar 7 01:43:15: 528317.960 CMAC_LOG_ADJUST_TX_POWER 14
*Mar 7 01:43:15: 528317.962 CMAC_LOG_POWER_LEVEL_IS 34.0 dBmV (commanded)
*Mar 7 01:43:15: 528317.964 CMAC_LOG_RANGING_CONTINUE
*Mar 7 01:43:16: 528318.968 CMAC_LOG_RNG_REQ_TRANSMITTED
*Mar 7 01:43:16: 528318.970 CMAC_LOG_RNG_RSP_MSG_RCVD
*Mar 7 01:43:16: 528318.974 CMAC_LOG_RANGING_SUCCESS
*Mar 7 01:43:16: 528318.976 CMAC_LOG_STATE_CHANGE dhcp_state
*Mar 7 01:43:16: 528318.978 DHCP_COMPLETE
*Mar 7 01:43:16: 528318.980 CMAC_LOG_STATE_CHANGE establish_tod_state
*Mar 7 01:43:16: 528318.982 CMAC_LOG_TOD_COMPLETE
*Mar 7 01:43:16: 528318.984 CMAC_LOG_STATE_CHANGE security_association_state
*Mar 7 01:43:16: 528318.986 CMAC_LOG_SECURITY_BYPASSED
*Mar 7 01:43:16: 528318.988 CMAC_LOG_STATE_CHANGE configuration_file_state
*Mar 7 01:43:16: 528318.992 CMAC_LOG_CONFIG_FILE_PROCESS_COMPLETE
*Mar 7 01:43:16: 528319.028 CMAC_LOG_STATE_CHANGE registration_state
*Mar 7 01:43:16: 528319.030 CMAC_LOG_REG_REQ_MSG_QUEUED
*Mar 7 01:43:16: 528319.036 CMAC_LOG_REG_REQ_TRANSMITTED
*Mar 7 01:43:16: 528319.038 CMAC_LOG_REG_RSP_MSG_RCVD
*Mar 7 01:43:16: 528319.040 CMAC_LOG_COS_ASSIGNED_SID 1/4
*Mar 7 01:43:16: 528319.044 CMAC_LOG_RNG_REQ_QUEUED 4
*Mar 7 01:43:16: 528319.046 CMAC_LOG_REGISTRATION_OK
*Mar 7 01:43:16: 528319.048 CMAC_LOG_STATE_CHANGE establish_privacy_state
*Mar 7 01:43:16: 528319.052 CMAC_LOG_STATE_CHANGE maintenance_state
If the DHCP server could not be reached, the error would look like this in the MAC log:
497959.800 CMAC_LOG_STATE_CHANGE dhcp_state
497969.864 CMAC_LOG_RNG_REQ_TRANSMITTED
497969.866 CMAC_LOG_RNG_RSP_MSG_RCVD
497979.936 CMAC_LOG_RNG_REQ_TRANSMITTED
497979.938 CMAC_LOG_RNG_RSP_MSG_RCVD
497989.802 CMAC_LOG_WATCHDOG_TIMER
497989.804 CMAC_LOG_RESET_DHCP_WATCHDOG_EXPIRED
497989.804 CMAC_LOG_STATE_CHANGE reset_interface_state
497989.806 CMAC_LOG_DHCP_PROCESS_KILLED
The fields in this display are explained in the “Step 4—Interpret the MAC Log File and Take Action”
section on page 10.
Example 2
MAC error log information is displayed in the following example, which is also reported via SNMP:
uBR904#
show controllers cable-modem 0 mac errors
74373.574 R02.0 No Ranging Response received. T3 time-out.
74374.660 R02.0 No Ranging Response received. T3 time-out.
74375.508 R02.0 No Ranging Response received. T3 time-out.
74375.748 R02.0 No Ranging Response received. T3 time-out.
74375.748 R03.0 Ranging Request Retries exhausted.
74376.112 R02.0 No Ranging Response received. T3 time-out.
74376.354 R02.0 No Ranging Response received. T3 time-out.
74376.778 R02.0 No Ranging Response received. T3 time-out.
74377.442 R02.0 No Ranging Response received. T3 time-out.
This output indicates that the cable modem acquired a downstream lock, successfully read a UCD,
and successfully read a MAP. However, it was unable to communicate with the CMTS after ranging
through all upstream transmit power levels (from 8 dBmv to 61 dBmv). The cable modem tried to
communicate with the CMTS 16 times without success, after which it reset the cable interface to try
to find a better downstream frequency.
Содержание uBR904
Страница 62: ...What to do Next 62 Cisco IOS Release 12 0 3 T ...