Cisco uBR10-MC5X20H, Быстрый старт

Страница: 5 / 10

5
Cabling the Cisco uBR10-MC5X20S/U/H Cable Interface Line Card with Universal Cable Holder—UCH2
OL-24878-01
Installing the Cables
Step 2
Remove the ESD cap from a cable, and insert it into the hole in the UCH2. See Figure 5 .
We recommend that the cables be installed in the UCH as shown in Table 1 and Table 2 .
Caution
If using quad-shielded cables, make sure there is no heat-shrink wrap on the ends by the MCX
connectors.
Note Precision miniature video coaxial cables come in various colors, and you can use any cable color
combination. However, when you are connecting the Cisco uBR10-MC5X20S/U/H cable interface card
to the Cisco RF switch, we recommend that you install the cables in the UCH as listed in
Table 1 .
Table 1 MC5X20 Dual/Qual Shielded Cable Ports and Cable Colors
Universal Cable Holder (1) Universal Cable Holder (2) Universal Cable Holder (3)
Line Card
Port Cable
Color RF Switch
User Defined Line Card
Port Cable
Color RF Switch
User Defined Line Card
Port Cable
Color RF Switch
User Defined
US
1
0
1. US = upstream
Red US10 Grey DS
2
0
2. DS = downstream
Red
US1 White US11 Brown DS1 White
US2 Blue US12 Red DS2 Blue
US3 Green US13 White DS3 Green
US4 Yellow US14 Blue DS4 Yellow
US5 Violet US15 Green — —
US6 Orange US16 Yellow — —
US7 Black US17 Violet — —
US8 Grey US18 Orange — —
US9 Brown US19 Black — —
Table 2 Legacy 5-Color MC5X20 Quad-Shielded Cable Ports and Cable Colors
Universal Cable Holder (1) Universal Cable Holder (2) Universal Cable Holder (3)
Line Card
Port Cable
Color RF Switch
User Defined Line Card
Port Cable
Color RF Switch
User Defined Line Card
Port Cable
Color RF Switch
User Defined
US
1
0 Red US10 Red DS
2
0 Red
US1 White US11 White DS1 White
US2 Blue US12 Blue DS2 Blue
US3 Green US13 Green DS3 Green
US4 Yellow US14 Yellow DS4 Yellow
US5 Red US15 Red — —
US6 White US16 White — —