Q
ui
ck R
efe
re
nc
e G
ui
de T
RC 5
How to:
Activate the system
Picking up the remote control activates the system. When not used,
the system will enter
Standby
mode after several minutes, however,
a system in standby can still receive incoming calls.
Place a call
Use the keypad to enter a number or URI and press the key to
place a call. You may also use the
Phone book
(the
key) or the
list of
Recent calls
to call any of your contacts.
Control your camera
With no menus open, the keys will let you control the camera.
If a menu is open, you will need select
Camera control
from the
Main menu
(press to display the
Main menu
).
Press the key when done.
Use the
Zoom
keys to zoom, if needed.
Select video sources
Press the
key to share contents from your PC
(make sure your PC is connected).
Press the
key again to switch back to the main camera.
To select other video sources (system dependent), use the
Presentation
in the
Main menu
(press to display the
Main menu
).
Answer an incoming call
To accept an incoming call press the key or the key.
Press the
key to reject an incoming call.
End a call
Press the
key to end a call. Press again (or press the key) to
confirm.
Adjust the volume
Use the
Volume
key to increase or decrease the volume.
A volume bar will appear.
Mute the microphone
Press the key to mute the microphone. You will be notified
by an on-screen icon.
Press the key again to reactivate the microphone.
Help desk contact information
D14844.01 May 2011
