Cisco TES301, Руководство пользователя

Страница: 53 / 138

VoIP Settings
4038767 Rev B 35
d Skip to step 5 to continue.
4 If you selected the Port Mapping option, complete the following steps:
a External Router Address —Enter the external router address. IPv4 address or
FQDN formats are acceptable for this field.
b External SIP Signal Port —Enter the external SIP signal port used to
communicate with SIP agent in public network.
c External Base RTP Port —Enter the external RTP stream port used to
communicate with SIP agent in public network.
5 Complete the following steps to configure Codec Settings:
a From the Disabled Codec list, select a Codec you want to enable.
b Click the Move Right arrow to move the selected item to the Enabled Codec
list.
c Use the Up / Down buttons to prioritize the Enabled Codecs.
d Select the top Codec in the Enabled list. The Codec Properties fields become
active.
e Complete the Codec Properties fields associated with the Codec selected:
– Payload Type —This value is pre-populated with a default setting. The
field will not be configurable if the default value is a required setting for
the codec selected.
–
Name —Provide a name to identify the codec type.
– Frame Size in ms —Select a setting to configure intervals between
sending RTP packets out to the RTP stream.
– Bit Rate —Select the data transmission rate from the list of available
options.