Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
28
xStatus Call [1..n] Caller LocalNumber
Shows the number called to reach the ISDN Link. For SIP callers this would be the number and
parameters needed to reach the callee.
Format:
String.
xStatus Call [1..n] Callee LocalNumber
Shows the number from which the ISDN Link is calling. this number is the callback number
for the called party. For SIP callee's this would include the number and parameters to perform
callback to the caller side.
Format:
String.
xStatus Call [1..n] Caller TransmitCallRate
xStatus Call [1..n] Callee TransmitCallRate
Shows the transmit bandwidth used between the calling party and the ISDN Link (Caller
transmitCallRate) or between the ISDN Link and the called party (Callee transmitCallRate). the
bandwidth is in kilobits per second (kbps).
Format:
Integer.
xStatus Call [1..n] Caller ReceiveCallRate
xStatus Call [1..n] Callee ReceiveCallRate
Shows the receive bandwidth used between the calling party and the ISDN Link (Caller
ReceiveCallRate) or between the ISDN Link and the called party (Callee ReceiveCallRate). the
bandwidth is in kilobits per second (kbps).
Format:
Integer.
xStatus Call [1..n] Caller Encryption Type
xStatus Call [1..n] Callee Encryption Type
Shows the encryption type used between the calling party and the ISDN Link (Caller encryption
type) or between the ISDN Link and the called party (Callee encryption type).
"None":
the call is not encrypted.
"Aes-128":
the encryption type for the call is AeS-128.
ExternalNetwork status
xStatus ExternalNetwork Interface [1..1] Status
Shows the status of the external Network interface.
Ready:
the external network is ready to relay calls.
NotReady:
the external network is not ready for use, e.g. when clock is missing or the line
is broken.
Off:
the external network is not enabled (i.e. xConfiguration H320 Nettype is not set to
external).
xStatus ExternalNetwork Interface [1..1] ClockRate
Shows the clock rate (in kbps) used for synchronous communication on the external network.
this clock is provided by the attached equipment.
Format:
Integer.
xStatus ExternalNetwork Interface [1..1] Channel [1..n] Status
Gives information about the call progress in a channel on the external interface. the information
indicates the various stages each channel goes through whilst establishing a connection. the
channel status is available for the current call (when active) or the last call.
Idle:
the channel is idle. this state is normally only seen if the channel has never been used.
Calling:
the network has acknowledged an incoming call, but the connection is not yet
established.
Answering:
the network has acknowledged an outgoing call, but the connection is not yet
established.
Connect:
the connection is established.
Disconnecting:
Waiting for the network to confirm the termination of the incoming or
outgoing call.
Disconnected:
the network has acknowledged the termination of the call. the channel is
available for a new call.
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Status information
