Phone.com Setup and Troubleshooting Guide
Cisco SPA122 Analog Telephone Adapter (ATA) with Router
9 / 9
Revised: 30 October 2012
Figure C
1. Unplug the Ethernet cable that connects your modem to your router.
2. Connect that cable from your modem to the
Internet
port of the ATA.
3. Using the Ethernet cable that came with your SPA122, connect the
Ethernet
port of your ATA to
the WAN or Internet port of your router.
Now, you have put your SPA122 outside the network that is run by your router, so the technologies that
might otherwise interfere with your VoIP calls are not affecting your ATA anymore.
Additional Support
In the end, this guide should help you get your Cisco SPA122 ATA up and running with your Phone.com
service, and help you use some of its basic features.
Hopefully, the Troubleshooting section helped if you experienced any issues with setting up your ATA or
using your phone. If you still have any questions or require further assistance, you can reach Phone.com
Customer Care 24
×
7. Simply send an email to
, visit us on the web at
https://www.phone.com/customer-support/
, or call us at 1-800-998-7087.
Thank you for reviewing this information!
© 2012 Phone.com, Inc. All rights reserved
Cisco, the Cisco logo, and Cisco images are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. Third party trademarks mentioned are the property of their respective owners.
The Crystal Project and Open Icon Library icons are licensed under the GNU General Public License.
OSA Icon Library files are licensed under the Creative Commons ShareAlike license.
