Rack Installation Tools Required
The slide rails sold by Cisco Systems for this server do not require tools for installation.
Slide Rail and Cable Management Arm Dimensions
The slide rails have an adjustment range of 24 to 36 inches (610 to 914 mm).
The optional cable management arm (CMA) adds additional length requirements:
• The additional distance from the rear of the appliance to the rear of the CMA is 5.4 inches (137.4 mm).
• The total length of the appliance including the CMA is 35.2 inches (894 mm).
Installing the Appliance in a Rack
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
Statement 1006
Warning
Step 1
Attach the inner rails to the sides of the appliance:
a) Align an inner rail with one side of the appliance so that the three keyed slots in the rail align with the three pegs on
the side of the appliance.
b) Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the pegs. The front slot
has a metal clip that locks over the front peg.
c) Install the second inner rail to the opposite side of the appliance.
Figure 7: Attaching the Inner Rail to the Side of the Appliance
Locking clip on front of inner rail
2
Front of appliance
1
Cisco Secure Network Server 3600 Series Appliance Hardware Installation Guide
17
Installing the Appliance
Installing the Appliance in a Rack
