manualshive.com logo in svg

Cisco SCH-IO-EXT-8, Справочное руководство

Поделиться
Скачать
Cisco SCH-IO-EXT-8 Скачать руководство пользователя страница 9

 

9

Cisco Smart+Connected I/O Extender Reference Guide

OL-27368-01

  Configuring the Cisco I/O Extender

Figure 9

Relay Port, Normally Closed 

Connect the Serial Ports 

The Cisco I/O Extender provides four (4) DB9-style serial ports that use the RS-232 protocol. Connect 
a device to the Cisco I/O Extender—for example, a receiver or disc changer—by aligning the pins, 
inserting the plug and tightening the screws. Serial ports support many different baud rates. All ports 
support Odd, Even and No Parity and hardware flow control. 

Setting Up IR Emitters or IR Blaster

Your system may contain third-party products that are controlled through IR commands (usually using 
remote controls). To provide a way for the Cisco Controller to control a device that only recognizes IR 
commands, complete the following:

Procedure

Step 1

Plug the 3.5 mm connector end of one of the 4 IR stick-on emitters provided into an IR Out port on the 
Cisco I/O Extender. 

Step 2

Place the stick-on emitter end over the IR receiver on the Media Player, TV, or other target device to 
drive IR signals from the Cisco I/O Extender to the target. 

Configuring the Cisco I/O Extender

After you install and connect the hardware, use the Composer Pro software to configure the devices and 
customize the system. 

See the 

Cisco Smart+Connected Residential Installation and Configuration Guide 

for more information.

Содержание SCH-IO-EXT-8















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды