Cisco SCE8000 GBE, Руководство по установке

Страница: 41 / 50

41
Step 13
Click Finish.
The Configuration Output window opens (see Figure 30 ).
Figure 30 Usage Analysis Wizard—Configuration Output Window
New devices are added to the default site of the Site Manager tree in the Network Navigator (see Figure 31) .
Figure 31 Network Navigator
The wizard attempts to connect to all the devices that you defined. The operation fails if:
–
The wizard cannot connect to any of the SCE devices that you listed in Step 4 .
–
You defined a Collection Manager in Step 8 , but the wizard cannot connect to it.
If you defined a Collection Manager in Step 8 , the SCE devices are configured so that the only category 1 RDR
destination is the CM.