Cisco S190 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 20

Cisco S190 Скачать руководство пользователя страница 14

14

Step 3

At the prompt, run the

systemsetup

command.

Run the System Setup Wizard

The System Setup Wizard starts automatically when you access the appliance via
the web-based interface and displays the end user license agreement (also known
as the EULA).

Step 1

Accept the end user license agreement.

Step 2

Enter information from the

“Document Network Settings” section on

page 4

.

If you need additional information about the settings, choose

Help and

Support > Online Help

.

Step 3

Review the configuration summary page.

Step 4

Click

Install this Configuration

.

Step 5

The appliance may not appear to have accepted your configuration or
be performing the installation. This is because you have changed the IP
address, but the installation is underway.

Step 6

If you temporarily changed the IP address of your computer as
described above, change the IP address settings back to the original
values.

Step 7

Ensure that your laptop and the appliance are connected to the
network.

Step 8

Log in to the appliance again, at the hostname or IP address that you
noted in the

“Plan the Installation” section on page 6

. Use the username

admin

and the new password that you entered in the wizard.

The Cisco M390 Content Security Management Appliance uses a
self-signed certificate that may trigger a warning from your web
browser. You can simply accept the certificate and ignore this warning.

Step 9

Be sure to keep your new administrator password in a safe place.

«
...
12
13
14
15
16
...
»

Содержание S190





















Отзывы:

Нет отзывов