
13
Log In to the Appliance
You can log in to the Cisco S190 appliance using one of two interfaces: the
web-based interface or the command-line interface.
Web-Based Interface
Step 1
For web browser access via the Ethernet port (see the
“Connect to the
Appliance” section on page 11
), go to the Cisco S190 appliance
management interface by entering the following URL in a web browser:
http://192.168.42.42:8080
Step 2
Enter the following login information:
•
Username:
admin
•
Password:
ironport
Note
The hostname parameter is assigned during system setup. Before you
can connect to the management interface using a
hostname
(http://hostname:8080), you must add the appliance
hostname
and IP
address to your DNS server database.
Step 3
Click
Login
.
Command-Line Interface
Step 1
Access the command-line interface locally or remotely:
•
To access the CLI locally, set up a terminal to connect to the serial
port using 9600 bits, 8 bits, no parity, 1 stop bit (
9600, 8, N, 1
) and
flow control set to Hardware. To physically connect the terminal,
see the
“Connect to the Appliance” section on page 11
).
•
To access the CLI remotely, initiate an SSH session to the IP address
192.168.42.42
.
Step 2
Log in as
admin
with the password
ironport
.