Cisco RV180, Руководство администратора

Страница: 49 / 187

Configuring Networking
Configuring the LAN (Local Network) Settings
Cisco RV180/RV180W Administration Guide 40
2
STEP 3
Configure the following settings:
STEP 4
In the Port Configuration Table , you can select a port and configure the following:
Bridge Priority Enter a bridge priority from 0 to 61440 in
increments of 4096. Valid values are 0, 4096, 8192,
12288, 16384, 20480, 24576, 28672, 32768,
40960, 45056, 49152, 53248, 57344, and 61440.
This value is the priority component of the bridge
identifier of the network node. The lower the
system priority, the more likely the Cisco RV180W
is to become the root in the Spanning Tree. The
default is
327688 .
Hello Time The hello time is the time period that the root of the
spanning tree waits before sending hello
messages. Enter a number from 1 to 10 seconds.
The default is
2 .
Max Age The max age is the time period that the router waits
to receive a hello message. If the max age is
reached, the router tries to change the spanning
tree to use another path to the root node. Enter a
number from 6 to 40 seconds. The default is
20 .
Forward Delay The forward delay is the interval spent by a port in
learning state before moving to the forwarding
state. Enter a number from 4 to 30 seconds. The
default is
15 .
Migrate Time Migrate time is the maximum time spent by a port
locked in RSTP mode. As soon as this timer
expires, the port adapts to the mode (RSTP/STP)
that corresponds to the next hello message. Enter a
number from 0 to 65535. The default is 3.
Interface Displays the interface that is a port of the RSTP-
enabled bridge.
Port Priority The priority assigned tot he bridge port for
determining the root port.
Edge Status Displays the edge status of the port.