8
Cisco RV160 Router Quick Start Guide
S
TEP
3
Enter the
Username
.
S
TEP
4
Enter the old
Password
.
S
TEP
5
Enter the new
Password.
S
TEP
6
Confirm the
new
Password
.
S
TEP
7
Select the group (
admin, guest
) from the drop-down list in the
Password Strength Meter.
S
TEP
8
Click
Save
.
Troubleshoot Your Connection
If you cannot access your device by using the
Setup Wizard
, the device
may not be reachable from your computer. You can test network
connections by using
ping
on a computer running Windows:
S
TEP
1
Open a command window by using
Start
>
Run
and enter
cmd
.
S
TEP
2
At the
Command
window prompt, enter
ping
and the device IP
address. For example,
ping
192.168.1.1 (the default static IP
address of the device).
If you can reach the device, you should get a reply similar to the
following:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
If you cannot reach the device, you should get a reply similar to the
following:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Possible Causes and Resolutions
Bad Ethernet connection:
Check the LEDs for the proper indications. Check the connectors of the
Ethernet cable to ensure that they are firmly plugged into the device
and your computer.
Wrong or conflicting IP address:
Verify that you are using the correct IP address of the device.
Verify that no other device is using the same IP address as this device.
No IP route:
