Cisco TelePresence PrecisionHD Camera
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
7
User Guide
The PrecisionHD Camera 1080p4x
Part number: CTS-PHD-1080P4XS=
HDMI and Camera Control
HDMI video out
• HDMI is the video out source.
• The maximum resolution is 1080p30/720p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy-chain control is not supported. The camera can be used
in a chain of multiple cameras, but only as the last camera in
the chain.
Power
• When the camera is used with a Cisco Codec, power is
supplied through the Camera Control cable.
• When the camera is used with non-Cisco codecs, you may
have to connect the power separately.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
CAUTION!
Do not pan or tilt the PrecisionHD 1080p4x camera
by hand!
NOTE:
The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD 1080p4x camera (the
PrecisionHD 1080p
4x*
camera).
* Available for a limited period of time.
See the
“Technical specifications” on page 35
section for details.
The orange LED is lit during a call.
The green LED is continuously lit when
power is On, but it flickers when receiving
signals from the remote control.
USB HDMI Video
out
Power supply Camera control
and power
Kensington lock
Contents
Introduction
The Physical Interface
Connecting the Camera
Appendices
Daisy Chaining
Video Output Format
The Physical Interface
