Cisco TelePresence PrecisionHD Camera
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
23
User Guide
Example: PrecisionHD 720p cameras in a daisy chain.
Connect to the
Camera Control
socket on the codec.
Daisy chaining PrecisionHD 720p
A single daisy chain can have:
• Three cameras when using a Codec C60
• Seven cameras when using a Codec C90.
Locate the extra camera and power connectors:
• Power:
The first camera in the chain is powered up from the
codec by a VISCA camera control cable. Additional cameras
must use the 12V DC Power in.
• Extra camera cable:
The daisy chained cameras are con-
nected by a VISCA Extra Camera cable (maximum length
20 m / 65.6 ft) between the Extra Camera and Codec Control
sockets
NOTE:
Only the first camera’s software is automatically updated
in a daisy chain. To update the other cameras you have to con-
nect them directly to the codec.
Second
camera
Third
camera
Power in
12V DC
Power in
12V DC
RJ11–RJ45
RJ11–RJ45
VISCA™ is a trademark of Sony Corporation
RJ11–RJ45
HDMI out:
Connect to the
Video Input 2 on
the codec
HDMI out:
Connect to the
Video Input 1 on
the codec
HDMI out:
Connect to the
Video Input 3 on
the codec
Main
camera
Contents
Introduction
The Physical Interface
Connecting the Camera
Appendices
Daisy Chaining
Video Output Format
Daisy Chaining
