C-26
Cisco ONS 15600 Reference Manual, R7.0
Appendix C Network Element Defaults
C.3 Node Default Settings
•
Security Access settings—Set default security settings for LAN access, shell access, serial craft
access, element management system (EMS) access (including Internet Inter-Object Request Broker
Protocol [IIOP] listener port number), TL1 access, and SNMP access.
•
Security RADIUS settings—Set default RADIUS server settings for accounting port number,
authentication port number, and whether to enable the node as a final authenticator.
•
Security Policy settings—Set the allowable failed logins before lockout, idle user timeout for each
user-level, optional lockout duration or manual unlock enabled, password reuse and change
frequency policies, number of characters difference between the old and new password, password
aging by security level, enforced single concurrent session per user, and option to disable inactive
user after a set inactivity period.
•
BITS Timing settings—Set the coding, framing, and state settings for building integrated timing
supply 1 (BITS-1) and BITS2 timing.
•
General Timing settings—Set the mode (External, Line, or Mixed), quality of reserved (RES) timing
(set the rule that defines the order of clock quality from lowest to highest), revertive, reversion time,
and SSM message set for node timing.
Note
Any node level defaults changed using the
Provisioning > Defaults
tab, changes existing node level
provisioning. Although this is service affecting, it depends on the type of defaults changed, for example,
general, and all timing and security attributes. The “Changing default values for some node level
attributes overrides the current provisioning.” message is displayed. The Side Effects column of the
Defaults editor (right-click a column header and select
Show Column > Side Effects
) explains the effect
of changing the default values. However, when the card level defaults are changed using the
Provisioning > Defaults
tab, existing card provisioning remains unaffected.
Note
For more information about each individual node setting, refer to the “Change Node Settings” chapter
of the
Cisco ONS 15600 Procedure Guide
.
Table C-4
Node Default Settings
Default Name
Default Value Default Domain
NODE.circuits.State
IS,AINS
IS, OOS,DSBLD,
OOS,MT,
IS,AINS
NODE.circuits.upsr.ReversionTime
5.0 (minutes) 0.5, 1.0, 1.5 ..
12.0
NODE.circuits.upsr.Revertive
FALSE
TRUE, FALSE
NODE.circuits.upsr.STS_SDBER
1.00E-06
1E-5, 1E-6, 1E-7,
1E-8, 1E-9
NODE.circuits.upsr.STS_SFBER
1.00E-04
1E-3, 1E-4, 1E-5
NODE.circuits.upsr.VT_SDBER
1.00E-06
1E-5, 1E-6, 1E-7,
1E-8, 1E-9
NODE.circuits.upsr.VT_SFBER
1.00E-04
1E-3, 1E-4, 1E-5
NODE.general.DefaultsDescription
Factory
Defaults
Free form field
Содержание ONS 15600 Series
