Cisco ONS 15540 ESPx, Руководство по установке оборудования

Страница: 204 / 214

Appendix A Specifications
10-GE Transponder Module Specifications
A-22
Cisco ONS 15540 ESPx Hardware Installation Guide
78-16436-01
10-GE Transponder Module Specifications
Table A-15 specifies the client side transmit and receive characteristics for the
10-GE transponders.
Note
Error-free transmission of some D1 video signals (defined by the SMPTE 259M
standard) and test patterns (such as Matrix SDI) cannot be guaranteed by the
Cisco 15500 Series because of the pathological pattern in D1 video. This
well-known limitation is usually overcome by the D1 video equipment vendor,
who uses a proprietary, second level of scrambling. No standards exist at this time
for the second level of scrambling.
Table A-15 10-GE Transponder Module Client Side Optical Specifications
Description Specification
Fiber type SM 1310 nm
Connector SC
Dimensions 10.4 x 1.105 x 8.797 in.
(264.2 x 28.1 x 223.4 mm)
Bit rate 10 GE LAN-PHY
Receiver Minimum Maximum
Receive sensitivity –13.23 dBm
Receive overload 0.5 dBm
Stressed receive sensitivity -10.3 dBm
Transmitter Minimum Maximum
Transmit power -5.2 dBm 0.5 dBm
Wavelength range 1260 nm 1355 nm