Cisco ONS 15540 ESPx, Руководство по установке оборудования

Страница: 87 / 214

2-31
Cisco ONS 15540 ESPx Hardware Installation Guide
78-16436-01
Chapter 2 Installing the Cisco ONS 15540 ESPx
Installing and Removing Modules
Step 3 Continue to pull the latch down and use the latch to pull the SFP out of the
module. (See
Figure 2-13 .)
Step 4
Place the removed SFP in a container appropriate for shipping and storage.
Installing 10-GE Transponder Modules
You must install a 10-GE transponder module in a 10-GE line card motherboard
for proper operation in a Cisco ONS 15540 ESPx. The 10-GE line card
motherboards support up to two half-width 10-GE transponder modules.
To install 10-GE transponder modules, follow these steps:
Step 1
Remove the failed or blank module from the 10-GE line card motherboard.
Step 2 Take a new module from the shipping container.
Step 3
Insert the module carefully into the motherboard slot while guiding the upper and
lower edges of the module in the tracks until its connectors come into contact with
the backplane connectors. You hear a click when it is connected. (See
Figure 2-14 .)