Cisco Nexus 7000 Series, Справочник по командам

Страница: 798 / 1018

show hardware rate-limiter
To display the hardware rate limit configuration and statistics, use the show hardware rate-limiter command.
show hardware rate-limiter { access-list-log [ module module ]| copy [ module module ]| f1 { rl-1 [ module
module ]| rl-2 [ module module ]| rl-3 [ module module ]| rl-4 [ module module ]| rl-5 [ module module ]}| layer-2
{ l2pt [ module module ]| mcast-snooping [ module module ]| port-security [ module module ]| storm-control
[ module module ]| vpc-low [ module module ]}| layer-3 { control [ module module ]| glean [ module module ]|
glean-fast [ module module ] mtu [ module module ]| multicast { directly-connect [ module module ]|
local-groups
[
module module
]|
rpf-leak
[
module module
]}|
ttl
[
module module
]}|
module module
|
receive
[
module module
]}
Syntax Description
Specifies rate-limit statistics for access-list log
packets. access-list-log
Specifies a module number. The range is from 1 to
18. modulemodule
Specifies rate-limit statistics for copy packets. copy
Specifies the control packets from the F1 modules to
the supervisor. f1
Specifies the F1 rate-limiter 1. rl-1
Specifies the F1 rate-limiter 2. rl-2
Specifies the F1 rate-limiter 3. rl-3
Specifies the F1 rate-limiter 4. rl-4
Specifies the F1 rate-limiter 5. rl-5
(Optional) Displays Layer 2 packet rate limits. layer-2
Specifies rate-limit statistics for Layer 2 Tunnel
Protocol (L2TP) packets. l2pt
Specifies rate-limit statistics for Layer 2
multicast-snooping packets. mcast-snooping
Specifies rate-limit statistics for Layer 2 port-security
packets. port-security
Specifies rate-limit statistics for Layer 2 storm-control
packets. storm-control
Cisco Nexus 7000 Series Security Command Reference
772
Show Commands
show hardware rate-limiter