7
SCG1006
Cisco Nexus 5548UP Switch Configuration Guide
Confirm the password for "admin":
my password
---- Basic System Configuration Dialog ----
This setup utility will guide you through the basic configuration of
the system. Setup configures only enough connectivity for management
of the system.
Please register Cisco Nexus 5000 Family devices promptly with your
supplier. Failure to register may affect response times for initial
service calls. Nexus devices must be registered to receive entitled
support services.
Press Enter at anytime to skip a dialog. Use ctrl-c at anytime
to skip the remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no):
yes
Create another login account (yes/no) [n]:
n
Configure read-only SNMP community string (yes/no) [n]:
n
Configure read-write SNMP community string (yes/no) [n]:
n
Enter the switch name :
my switch name
Continue with Out-of-band (mgmt0) management configuration? (yes/no) [y]:
y
Mgmt0 IPv4 address :
my IP address
Mgmt0 IPv4 netmask :
my netmask
Configure the default gateway? (yes/no) [y]:
y
IPv4 address of the default gateway :
my gateway
Enable the telnet service? (yes/no) [n]:
y
Enable the ssh service? (yes/no) [y]:
n
Configure the ntp server? (yes/no) [n]:
n
Enter basic FC configurations (yes/no) [n]:
n
The following configuration will be applied:
switchname
my switch name
interface mgmt0
ip address
my ip address my netmask
no shutdown
exit
vrf context management
ip route 0.0.0.0/0
my gateway
