S e n d f e e d b a c k t o n e x u s 4 K - d o c f e e d b a c k @ c i s c o . c o m
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Nexus 4001I and 4005I Switch Module for
IBM BladeCenter Getting Started Guide
This document includes the following sections:
•
Overview, page 1
•
Safety Warnings, page 2
•
Verifying your Shipping Contents, page 2
•
Connecting Devices, page 3
•
Configuring the Switch, page 4
•
Managing the Switch, page 9
•
Related Documentation, page 10
•
Obtaining Documentation and Submitting a Service Request, page 10
Overview
This guide provides instructions on how to install, configure, and manage your Cisco Nexus 4001I and
4005I Switch Module for IBM BladeCenter—referred to as the switch module—in the IBM BladeCenter
enclosure, and how to set up and configure your switch module.
For additional installation and configuration information about the switch module, see the switch module
documentation on Cisco.com.
For blade enclosure compatibility, system requirements, important notes, limitations, open and resolved
caveats, and last-minute documentation updates about the switch module, see the release notes, also on
Cisco.com. When you use the online publications, refer to the documents that match the Cisco NX-OS
software version that is running on the switch module.
